seat hump mod for the hayabusa

[jezza 0]

Seeing has the seat hump is wasted space I done a search on the internet and see a few people had turned it into a small storage area,being a tad bored I thought I'd have a go at it.

first of all I purchased 4 each of these. 1/4 turn fairing clips

http://www.ebay.co.uk/itm/130686398126?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_3503wt_1044.

I then removed the four bolts securing the base to the hump. Next it was to remove the four securing clips off the hump , these just slide off . These were then replaced with the 1/4 turn clips.

[img width=338 height=600]http://i63.photobucket.com/albums/h152/jebsadie/IMAG0224.jpg[/img]


next was to put the 1/4 turn pins in the seat base, these just pushed through with a click due to a lip on them (this stops them falling out and losing them when the base is removed.

[img width=450 height=253]http://i63.photobucket.com/albums/h152/jebsadie/IMAG0225.jpg[/img]

next place the base up to the hump and install.

[img width=338 height=600]http://i63.photobucket.com/albums/h152/jebsadie/IMAG0222.jpg[/img]

[img width=338 height=600]http://i63.photobucket.com/albums/h152/jebsadie/IMAG0223.jpg[/img]


Thats it all done , less than 10 mins to do and you now have a small storage area for your bits n bobs.

[Davehutch-hutchs 0]

can't see the pics Jez

[Stue11 0]

@Davehutch wrote:

can't see the pics Jez

His settings must be on private cant see em neither

[Stue11 0]

@Stue11 wrote:

@Davehutch wrote:

can't see the pics Jez

His settings must be on private cant see em neither

sorry didnt notice basket