front paddock pin stand

[madsod 0]

i have this type of stand got it for the GSXR and found out to day it will work on the RF if your fork legs have a hole in the bottom and most do . must be used with a rear stand . i got the pair for £45 del some time a go , you can take the front wheel out with this type and most you cant . well made




http://www.ebay.co.uk/itm/BF-PADDOCK-STAND-FRONT-BMW-HP2-K1200-K1300-F800-NEW-/250715172889?pt=UK_Motorcycle_Parts&hash=item3a5fc9f019

[gravelrash 0]

Got a similar one for the Bandit Garry but the pins hit the spindle making it very difficult to remove, so I have to put a spacer between the fork bottom and the top of the spike ( just a couple of big washers for clearance) which works but its worth keeping in mind for certain bikes

[Tony nitrous 0]

Interesting...

I have a couple of similar stands I use for the rear
but never considered using adapters to lift from the fork bottoms.

Most of my bikes would have suitable forks.

I might look into this.

The rear bugger is the GSX1100ET.
It has plastic adjusters under the fork bottoms
and cant be lifted under the bottom yolk as the
choke cable run's up through the stem!