Mr TREBOR need help again please m8 ?

[always1more 0]

Hiya Rob,

Pain in theee asss ain't I lol.

These valve seals are a reet tw@t m8 but getting there. Trouble is I need it sorting for Tuesaday morning as the Daughter wants her car for work. I'm doing ok on the seals, but because I've taken the Camshaft carrier off I need new gasket sealant. Now I asked the muppets on the Rover MG ZR forum and a member stated I need some special shit which is this http://www.onlinebearings.co.uk/loctite-574-flange-sealant-fast-cure-pr-16417.html

Well when I took the carrier off yesterday when she had her headgasket renewed last year they must have used some black gasket sealant as that's all I see on the mating surfaces.

When I was at the motorfactors this morning they wanted £13.50 for some locktight sealant which looks like what was used last year. So when I asked if that's ok to seal the two surfaces the fella on the Rover forum said big NO NO it needs to be

.
NoYou must use an anaerobic sealant such as the one specified by Rover.

What's you're thought Rob on this because no motor factors open now till Tuesday and I need this sorted for Tuesday so Halfrauds are open if I get desperate and was looking at this, same as the motor factors this morning http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_165466_langId_-1_categoryId_165691

Thanks in advance

[trebor4460 0]

hi tim,
i recken loctite 515 flange sealent will do http://cgi.ebay.co.uk/LOCTITE-515-GASKET-FLANGE-SEALANT-50ML-TUBE-RRP-29-81-/350459305043?pt=UK_BOI_FarmingEquipment_RL&hash=item5199009c53

but to do the job proper loctite 574 http://cgi.ebay.co.uk/LOCTITE-574-FLANGE-SEALANT-ONLY-3-LEFT-STOCK-NOW-/180659260718?pt=UK_Crafts_Cardmaking_Scrapbooking_Glue_Tape_EH&hash=item2a10218d2e

the halfords 1 is worth a shout if you are stuck but i would try and get my hands on the 574 if you can, might be worth ringing round a few motor factors, you might get lucky.

[always1more 0]

Rob I could kiss yer m8...but yer kno me I'm str8 as they come lol.

Noted mucker and ure truly a massive asset to Hutch's Forum and they should make you a honory member

Thanks pal

[trebor4460 0]

Lol, kind of u to say Tim.... Hope u get the job sorted m8.

[always1more 0]

I meant it to pal....you give lots of sound advise....tell Dave I asked for you to be the 1st honary member

Right I've found a local Land Rover place in Sint Helens will keep yers posted

[Stue11 0]

Im meeting the right honurable tommorow Tim well said mate he his as are a other members thats what makes forums what they are and this one is the best

[always1more 0]

@Stue11 wrote:

Im meeting the right honurable tommorow Tim well said mate he his

He's a good man Stu...buy him a pint from me

[Stue11 0]

@always1more wrote:

@Stue11 wrote:

Im meeting the right honurable tommorow Tim well said mate he his

He's a good man Stu...buy him a pint from me

It will have to be a coffee 2mw mate for sure

[always1more 0]

Okdokie Stu I owe you the coffee then for Robs Coffee tomorrow

[Stue11 0]

@always1more wrote:

Okdokie Stu I owe you the coffee then for Robs Coffee tomorrow

[Neill 0]

anearobic just means it sets when air is removed
it stay's liquid in air

[always1more 0]

Brilliant....thanks for that Neill, just learnt someting new

[Stue11 0]

@Neill wrote:

anearobic just means it sets when air is removed
it stay's liquid in air