Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
danoneism

[wip] hypermite hyper-hauler... [ latest updated 10/12/2010 pg3]

Recommended Posts

sneek peek on my latest project….. i called it hyper-hauler… based on HW’s hyper-mite.. ive custom a new fender and a new rear part to convert it into a car hauler….
the pic shows hows my idea on this project which ive done a mock-up using modelling clay… later on i’ll will do a new chasis and new bodypart for the rear end… (aha..thats my unfinished DAMD evo7 hehe.. )



______________________________________________________________________________________
update [08/08/2010]

here's a lil bit update on my progress.....
im using balsa wood for the new extended chasis...



a lil sneak peek on how it will looks like....





stay tuned for latest update….
happy customizing…
cheers…..

Share this post


Link to post
Share on other sites
hehehe... yup the DD its one of my other project..... ive actually got a lot of unfinished project... so i didnt post it here....

Share this post


Link to post
Share on other sites
thanx sinclair... hehe... just hope i can finished this one as quickly as posible.. haha.. dont wanna add another car in my unfinished projects list... hahaha..

Share this post


Link to post
Share on other sites
Good luck on your new project. Hope to see the finished product

Share this post


Link to post
Share on other sites
sahama wrote:
Good luck on your new project. Hope to see the finished product


hehe... yup.. lets hope i can finished this one.. hehehe..

kelvinator21 wrote:
wow!!! cool, bro!!!
that's what i call genius & art of work!! cheers


Haha.... thanx bro.... just trying to create something from nothing.. hahaha.. hypermite is quite a typical peggers so why not turn it into something more intresting.. hahaha

Share this post


Link to post
Share on other sites

wow, real deal of customiser!!! maybe u can be my master~
really great job done here bro!!
eh, DAMD evo still doesnt finished yet bro? u must be very busy i think.. Smile

Share this post


Link to post
Share on other sites
danielh wrote:
nice work! hope to see the final result!


thanx danielh... hehe... allow me some time to finish it... hehe..

xebec-Crash wrote:
wow great idea on that...impressive what hv u done....

thanx bro.. hehe...

jhc7598 wrote:
wow, real deal of customiser!!! maybe u can be my master~
really great job done here bro!!
eh, DAMD evo still doesnt finished yet bro? u must be very busy i think.. Smile


haha... im also still learning la bro... just exploring there materials... remember when i did my DAMD im using white putty.. so this one im using another one... which i can say its more better than the white one... haha.. .. ya.. my DAMD evo still not finished yet... hehe... not quite busy but lets called it unfocus.. hahaha..

Share this post


Link to post
Share on other sites

hye guys... hehe.. well first of all i would like to wish a happy ramadhan.. hehe..

so well here's another update....
basicaly i target to complete the front end first before moving to the rear part which were totally scratchbuilt..... so.. ive add putty and sanded it off then add again n sand again... hehe.. here's what the result until now.... huhu..




hehe.. bonus pic!~...



that's all for now... stay tuned for more updates on my work progress....
comments and suggestion are welcome...
cheers....

Share this post


Link to post
Share on other sites
ive forgot to tell that until this stage, ive just use the 80grit sandpaper for sanding.. later on i'll use the 400 then 1000 to make the surface smooth... hehe..

Share this post


Link to post
Share on other sites

wow, great update.. i wish i got time to do customs.. Sad
btw really look forward to see the finish version!!
must be awesome!!

Share this post


Link to post
Share on other sites
jhc7598 wrote:
wow, great update.. i wish i got time to do customs.. Sad
btw really look forward to see the finish version!!
must be awesome!!


hehe... ur busy now?? its been a while since u post ur custom project here... hehehe.. i promise i'll finish this one.. haha.. maybe b4 raya.. so ive got a month to complete. it.. hehehe...

Share this post


Link to post
Share on other sites

smooth works onthe WIP. looks like this hyper hauler is in shape already.
Nice work.

Share this post


Link to post
Share on other sites
chee keng hong wrote:
hmm..interesting!! Waiting for the final touch!!

hehe... hope u'll be patient to wait.. hahaha..


sinclair wrote:
Coming along nicely.

thanx... hehe...


sahama wrote:
Happy you still working on your project.

yup.. haha.. because i really need a new hauler.. since my last one is quite outdated now.. hahaha..


danielh wrote:
smooth works onthe WIP. looks like this hyper hauler is in shape already.
Nice work.


hehe... need a lil more puttying and sanding then it is complete.... hehe.. then i can proceed to the rear part.. huhu

Share this post


Link to post
Share on other sites
So much work put on it... I wonder how it would turn up. Can't wait...May the force be with you...

Share this post


Link to post
Share on other sites

hehe.. thanx 4 the support guys... anyway back on the progress on my hypermite... ive done a lil bit more puttying which mostly focusing on the new side fender part.... on the last update, this part was still not level and quite out of shape... so ive add more putty to overcome the problem...



here's some pic of the new side fender.....
right side...


and left side....


well the front end i would say it is almost complete.. just need a lil bit sanding to smoothen the surface... then i can proceed to the rear end.... well actually the tricky part is to combine both ends which ive still not solve yet... maybe later on after the rear end is complete....

comments and critique are welcome...
cheers....

Share this post


Link to post
Share on other sites
Hypermite still in the shaping. Get helped from MBX forklift pula

Share this post


Link to post
Share on other sites

looking good, still need some refinement over the putty.
it will be good result in the end. Razz

Share this post


Link to post
Share on other sites
sahama wrote:
Hypermite still in the shaping. Get helped from MBX forklift pula

aha... yup.. it still under progress... and ya MBX forklift helps a lot.. hahaha...


danielh wrote:
looking good, still need some refinement over the putty.
it will be good result in the end. Razz

hehe.. thanx... yup. those putty need more and more sanding... huhu..

Share this post


Link to post
Share on other sites

hye guys...... today ive decided to sand the front body once more and spray primer coat on it... with the help of MBX forklift.. hehe..

enjoy the pix....








sorry for not completing straight away.. mainly because im a bit busy with other things also.. so my custom are mostly part time project and usually when im in a mood to do it.. hehe

happy customising,
cheers...

Share this post


Link to post
Share on other sites

From outside it looks like bug bunny head minus a pair of long ears and the 2 tooths Idea

Share this post


Link to post
Share on other sites

more updates...... hehe...

ok guys.. since ive already finalize the front part, so now its time to built the rear part.. ehe.. so basically ive attached the front part with the rear part.. then its time to translate imagination into reality.. huhu.. those guys invented this modelling clay really helps a lot in this stage... hehe... well enough of texting.. let the pix say the words...





hurm.... looks like a lil bit weird because the rear wheels is far outside compare to the front wheel which make it looks like it came off from two different car... so.. need to remodel it back... huhu...







hehe.. well i think this one looks better compare to the 1st option... so i'll continue with this one....



Share this post


Link to post
Share on other sites

ive modelled it using modelling clay on the other side and start using putty on the other side.. hehe.. just to make sure the end result is simmilar to what ive done using clay....





huhu... this hypermite have become a wide body truck... here's a pic to compare with the scion xb....



ok guys... stay tuned for more....

cheers...

Share this post


Link to post
Share on other sites
Still imagine some sort of a procession vehicle for hari merdeka

Share this post


Link to post
Share on other sites
Great update on your progress.. but, could you hurry up? I cant wait to see the finish product...

Share this post


Link to post
Share on other sites

these really needs alot of work, brother..
and patient too .. keep up the good work, bro!
let your imagination go wild & beyond infinity!! cheers! Very Happy

Share this post


Link to post
Share on other sites

thanx for the support guys.... hehe.. well here's another update.... basically ive sand down the putty and still need to add more to shape the rear fender....







after this i'll need to replicate it on the other side.. huhu.. actually it still a long way to go to complete it... never thought that this project need so muck work... huhu..

anyway here's some bonus pic...

side by side comparison with my old car hauler.....







stay tuned
cheers......

Share this post


Link to post
Share on other sites

almost completes bro! i think it will be very exciting hauler!! cheers

Share this post


Link to post
Share on other sites

almost 4 months without any update... hehe.. so here's a mini update of the WIP.....

basically, ive shaped up the right side with putty but still haven't sand it yet... huhu... then i equipt the hauler with a twin exhaust system...

here's the pix.....

the left side has been sanded one more to make sure the surface is level and smooth....


the right side was not sanded yet.. hehe.....


the exhaust system was drilled through the body......





stay tuned for more update...
happy customizing..
danoneism...

Share this post


Link to post
Share on other sites

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.