Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
GCW

DIY Display Case

Recommended Posts

Due to continous poisoning from evil bay, ran out of space on current display case. Thought I'll will share this project due to some enquires about my avatar display case.


Since forced to clear leave this week, thought of spending some time to build two new display case to fit into divider. Taking measurement with measuring tape (1st mistake) and calculate the number of slots that can fit VW model sizes. Settled on 4 columns and 8 rows making 32 slots.


Ordered necessary acrylic materials and adhesive from supplier.



Glue the back and sides to form the case. And test fit on divider, found ~5mm gap Mad , my measuring tape have a big error.


Glue the shelves and add to case. Notice some adhesive marks (2nd mistake) due to using board brush Mad for application.


Left with drilling the front cover but need to do that in the office. Will post pictures when case is complete and Hotwheels added Cool .

Share this post


Link to post
Share on other sites
wow nice display case there... thank for sharing... if dont mind may i ask how much is the total cost for making this...?

Share this post


Link to post
Share on other sites

Wow,this is a wonderful idea, may i know where to buy those material?
i means the acrylic materials and adhesive,thanks in advance. Very Happy

Share this post


Link to post
Share on other sites
Eight: It cost SGD$58 for 1st case, where everything is cut to size. Current case cost SGD$48 each, but need to cut smaller pieces myself.

Cooolman: Will PM you the site.

Share this post


Link to post
Share on other sites
woow thats cool

did your ordered the pieces according to your display shelves size or you cut it yourself?

Share this post


Link to post
Share on other sites
GCW wrote:
Eight: It cost SGD$58 for 1st case, where everything is cut to size. Current case cost SGD$48 each, but need to cut smaller pieces myself.


awesome... very reasonable price...

Share this post


Link to post
Share on other sites
zacktan and sinclair: Thanks

Raymond: Did some simple calculations and then ordered the big pieces as they can cut square and accurate to dimension. I only cut those small separators between the cars.

Share this post


Link to post
Share on other sites
Nice case buddy, would you be kind enough to pm me the supplier? Tnx.

Share this post


Link to post
Share on other sites
Wow!!
You did some great work!
I wish I had the time to do that!
Can I order you about 100 of those??? JOKE!!!!

Share this post


Link to post
Share on other sites

Nice case Very Happy
So the total cost of this case is 48 S$ ?

Share this post


Link to post
Share on other sites
nice case u have there bro. can pm me as well where to get the material? thanks.

Share this post


Link to post
Share on other sites

very nice and constructive idea of building your own display shelf. Smile

Share this post


Link to post
Share on other sites
wow nice .....i already make an order to fit 100 cars and the price around 80 dollar ...hopefully done by this week

Share this post


Link to post
Share on other sites
jhc7598, YU5H, danielh, zint3000 and xeifu - Thanks for viewing

redkop and kukubeh, drop you a PM about the supplier.

MarieJuliette - Really, will get 100 cases send to you Very Happy . A suggestion, get your children to build it for you Razz

hokuan - Yes, S$48 each case for materials only. But it is increasing due to another of my stupid mistake today.

xebec-Crash -
Quote :
i already make an order to fit 100 cars and the price around 80 dollar ...hopefully done by this week
Do share some pictures when you received your display.

Share this post


Link to post
Share on other sites

Here are the display cases installed into the divider upper shelves. Have to ensure it is tight so my children cannot knock them down.


Closeup



Phase 1 of project closed. Phase 2 will be another two cases for lower shelves for Baja and Custom VW Beetle in a few months time.

Share this post


Link to post
Share on other sites

love ur custom display...
and love ur collection of new beetle...
congratz~
cheers

Share this post


Link to post
Share on other sites
Liking your idea....i assume you will add the display on the other-side also?

Man...now you got to tell me where you score that mirror-backing!!!!!

Share this post


Link to post
Share on other sites
zint3000 and jhc7598 - Thanks for viewing.

RGSUKAN - Actually it is nice from far, far from nice. Some pieces are not equally spaced but it will do for my self display.

Rayz-HWC wrote:
Liking your idea....i assume you will add the display on the other-side also?

Man...now you got to tell me where you score that mirror-backing!!!!!


No, display flush to one side only. Using other side for picture frames. My initial intention was to use acrylic mirror backing too. But gave up due to significant cost difference.

Share this post


Link to post
Share on other sites
How much difference in cost = the one you're using VS acrylic mirror?

Share this post


Link to post
Share on other sites
Rayz-HWC wrote:
How much difference in cost = the one you're using VS acrylic mirror?


Found the price from another site:

(T)2mm x (W)1200mm x (L)1800mm Mirror - SGD$102
(T)2mm x (W)1200mm x (L)1800mm Clear - SGD$37

So it is about 2-3 times more. I'm sure it will look nicer with mirror backing, go for it if $ no issue:)

Share this post


Link to post
Share on other sites
sinclair wrote:
That is really a nice display you have built, bro.


Sinclair, Thanks. You need to show us how you store all your nice loose cars!

Share this post


Link to post
Share on other sites

Since there are some enquires on rack dimension, here it is:


Slot size is 65 Length X 40 Depth X 40 Height. Don't ask me where I got this dimension because it can't even fit my Beetle Cup Embarassed
I chose 5 rows and 6 columns to form 30 slots.

Shelve that supports cars: 337 Length X 40 Breadth X 3 Thick. Qty 5
Divider to separate cars: 40 Length X 40 Breadth X 3 Thick. Qty 24
Back Plate: 338 Length X 256 Breadth X 4 Thick. Qty 1
Left & Right Plate: 256 Length X 45 Breadth X 4 Thick. Qty 2
Top & Bottom Plate: 346 Length X 45 Breadth X 4 Thick. Qty 2
Front Cover: 346 Length X 264 Breadth X 3 Thick. Qty 1
And I use magnets to hold the front cover to the 4 corners to keep the dust out. Not need for hinges.

All dimension in millimeters. Hope I got the dimensions right as it is time for Sleep

Drop me a PM if you need help to work out your rack size.

Share this post


Link to post
Share on other sites
OMG that's really awesome man~

Share this post


Link to post
Share on other sites
@GCW: so those black rectangles at the four corners are magnets!!

thank you for that detailed dimensions. really appreciate it.

Share this post


Link to post
Share on other sites
Woah! It's like Living Skill project but it is in the form of acrylic..
Hurm.. We can buy the acrylic mirror in specific measurement as desired? Just glue them.. That's all?

Share this post


Link to post
Share on other sites
Props to you GCW for showing us this.. I'm sure lots of guys will be inspired..

Share this post


Link to post
Share on other sites
-SYAFIQ- - If I can do it, you can too. Just get the material and glue and stick them together.

matchboxclub - Only have Singapore distributor contact. Maybe some members can help you.

prabha71 - Thanks for viewing

Share this post


Link to post
Share on other sites

×
×
  • Create New...